Browse special in-store only deals available at our Maroubra NSW store including computers, laptops, gaming PCs, monitors and technology products.
5 products
Browse special in-store only deals available at our Maroubra NSW store including computers, laptops, gaming PCs, monitors and technology products.
Internal PC Speaker for Computer Motherboard | 2 Pack | In-Store Only
Regular price $9.95 Sale price $5.00 Save $4.95Special in-store pricing for this product is available exclusively at our Maroubra Store (NSW).
Universal motherboard internal speaker, commonly used for PC bios beep code diagnostics (2 Pack).
The computer POST (power-on self-test) checks a computer's internal hardware for compatibility and connection before starting the remainder of the boot process.
If the computer passes the POST, the computer may give a single beep (some computers may beep twice) as it starts and continues to boot.
However, if the computer fails the POST, the computer doesn't beep or generates a beep code telling the user the source of the problem.
Below are the AMI BIOS beep codes. However, due to the wide variety of computer manufacturers using this BIOS, the beep codes for your specific computer may differ slightly.
| Beep Code | Description |
|---|---|
| 1 short beep | DRAM (dynamic random access memory) refresh failure. |
| 2 short beeps | Parity circuit failure. |
| 3 short beeps | Base 64K RAM failure. |
| 4 short beeps | System timer failure. |
| 5 short beeps | Processor failure. |
| 6 short beeps | Keyboard controller Gate A20 error. |
| 7 short beeps | Virtual mode exception error. |
| 8 short beeps | Display memory Read/Write test failure. |
| 9 short beeps | ROM BIOS checksum failure. |
| 10 short beeps | CMOS battery replacement required. |
| 11 short beeps | Cache memory error. |
| 1 long, 2 short beeps | Video card memory issue. |
| 1 long, 3 short beeps | Conventional/Extended memory failure. |
| 1 long, 8 short beeps | Display/Retrace test failed. |
| Two-tone siren | Low CPU fan speed, voltage level issue. |
Below are the Award BIOS beep codes. However, due to the wide variety of computer manufacturers using this BIOS, the beep codes may vary.
| Beep Code | Description |
|---|---|
| 1 long, 2 short beeps | Video error has occurred; BIOS cannot initialize the video screen. |
| 1 long, 3 short beeps | Video card not detected (reseat or replace video card). |
| Beeps repeating endlessly | RAM problem. |
| Repeated high-frequency beeps while PC is running | Overheating processor (CPU). |
| Repeated beeps alternating high & low frequency | Processor (CPU) issue, possibly damaged. |
| Beep Code | Description |
|---|---|
| 1 beep | BIOS ROM corruption or failure. |
| 2 beeps | Memory (RAM) not detected. |
| 3 beeps | Motherboard failure. |
| 4 beeps | Memory (RAM) failure. |
| 5 beeps | CMOS battery failure. |
| 6 beeps | Video card failure. |
| 7 beeps | Bad processor (CPU). |
Below are general IBM BIOS beep codes. However, due to the variety of models, the beep codes may vary.
| Beep Code | Description |
|---|---|
| No beeps | Computer won't turn on. |
| 1 short beep | Normal POST, computer is OK. |
| 2 short beeps | POST error, check screen for error code. |
| Continuous beep | No power, loose card, or short. |
| Repeating short beeps | No power, loose card, or short. |
| 1 long, 1 short beep | Motherboard issue. |
| 1 long, 2 short beeps | Video (Mono/CGA display) issue. |
| 1 long, 3 short beeps | Video (EGA display) issue. |
| 3 long beeps | Keyboard or keyboard card error. |
| 1 beep, blank or incorrect display | Video display circuitry issue. |
| Beep Code | Description |
|---|---|
| 5 short, 1 long beep | Problem with DMA page registers. |
| 4 short, 1 long, 1 short beep | RAM refresh circuit failure. |
| 4 short, 2 short beeps | BIOS ROM checksum failure. |
| 3 short, 1 long, 2 short beeps | CMOS RAM test failure. |
| 3 short, 1 long, 1 short, 1 long beep | DMA controller failure. |
| 3 short, 2 long, 1 short beep | Interrupt controller failure. |
| 3 short, 3 long beeps | Keyboard self-test issue. |
| 2 short, 1 long, 3 short beeps | Video card not found. |
| 2 short, 1 long, 2 short, 1 long beep | No RAM installed or RAM not recognized. |
| Tone | Error |
|---|---|
| Error tone (two sets of different tones) | Problem with logic board or SCSI (small computer system interface) bus. |
| Startup tone, drive spins, no video | Problem with video controller. |
| Powers on, no tone | Logic board problem. |
| High tone, four higher tones | Problem with SIMM (single inline memory module). |
Below are the beep codes for Phoenix BIOS Q3.07 or 4.x.
| Beep Code | Description |
|---|---|
| 1-1-1-1 | Unconfirmed beep code. Reseat RAM or replace it as possible solution. |
| 1-1-1-3 | Verify real mode. |
| 1-1-2-1 | Get CPU type. |
| 1-1-2-3 | Initialize system hardware. |
| 1-1-3-1 | Initialize chipset registers with initial POST values. |
| 1-1-3-2 | Set in POST flag. |
| 1-1-3-3 | Initialize CPU registers. |
| 1-1-4-1 | Initialize cache to initial POST values. |
| 1-1-4-3 | Initialize I/O. |
| 1-2-1-1 | Initialize power management. |
| 1-2-1-2 | Load alternate registers with initial POST values. |
| 1-2-1-3 | Jump to UserPatch0. |
| 1-2-2-1 | Initialize keyboard controller. |
| 1-2-2-3 | BIOS ROM checksum. |
| 1-2-3-1 | 8254 timer initialization. |
| 1-2-3-3 | 8237 DMA controller initialization. |
| 1-2-4-1 | Reset programmable interrupt controller. |
| 1-3-1-1 | Test DRAM refresh. |
| 1-3-1-3 | Test 8742 keyboard controller. |
| 1-3-2-1 | Set ES segment to 4 GB. |
| 1-3-3-1 | Autosize DRAM. |
| 1-3-3-3 | Clear 512K base RAM. |
| 1-3-4-1 | Test 512 base address lines. |
| 1-3-4-3 | Test 512K base memory. |
| 1-4-1-3 | Test CPU bus clock frequency. |
| 1-4-2-4 | Reinitialize chipset. |
| 1-4-3-1 | Shadow system BIOS ROM. |
| 1-4-3-2 | Reinitialize cache. |
| 1-4-3-3 | Autosize cache. |
| 1-4-4-1 | Configure advanced chipset registers. |
| 1-4-4-2 | Load alternate registers with CMOS values. |
| 2-1-1-1 | Set initial CPU speed. |
| 2-1-1-3 | Initialize interrupt vectors. |
| 2-1-2-1 | Initialize BIOS interrupts. |
| 2-1-2-3 | Check ROM Copyright notice. |
| 2-1-2-4 | Initialize manager for PCI options ROMs. |
| 2-1-3-1 | Check video configuration against CMOS. |
| 2-1-3-2 | Initialize PCI bus and devices. |
| 2-1-3-3 | Initialize all video adapters. |
| 2-1-4-1 | Shadow video BIOS ROM. |
| 2-1-4-3 | Display Copyright notice. |
| 2-2-1-1 | Display CPU type and speed. |
| 2-2-1-3 | Test keyboard. |
| 2-2-2-1 | Set key click if enabled. |
| 2-2-2-3 | Enable keyboard. |
| 2-2-3-1 | Test for unexpected interrupts. |
| 2-2-3-3 | Display prompt Press F2 to enter SETUP. |
| 2-2-4-1 | Test RAM between 512 and 640 KB. |
| 2-3-1-1 | Test expanded memory. |
| 2-3-1-3 | Test extended memory address lines. |
| 2-3-2-1 | Jump to UserPatch1. |
| 2-3-2-3 | Configure advanced cache registers. |
| 2-3-3-1 | Enable external and CPU caches. |
| 2-3-3-3 | Display external cache size. |
| 2-3-4-1 | Display shadow message. |
| 2-3-4-3 | Display non-disposable segments. |
| 2-4-1-1 | Display error messages. |
| 2-4-1-3 | Check for configuration errors. |
| 2-4-2-1 | Test real-time clock. |
| 2-4-2-3 | Check for keyboard errors. |
| 2-4-4-1 | Set up hardware interrupts vectors. |
| 2-4-4-3 | Test coprocessor if present. |
| 3-1-1-1 | Disable onboard I/O ports. |
| 3-1-1-3 | Detect and install external RS232 ports. |
| 3-1-2-1 | Detect and install external parallel ports. |
| 3-1-2-3 | Re-initialize onboard I/O ports. |
| 3-1-3-1 | Initialize BIOS data area. |
| 3-1-3-3 | Initialize extended BIOS data area. |
| 3-1-4-1 | Initialize floppy controller. |
| 3-2-1-1 | Initialize hard disk controller. |
| 3-2-1-2 | Initialize local bus hard disk controller. |
| 3-2-1-3 | Jump to UserPatch2. |
| 3-2-2-1 | Disable A20 address line. |
| 3-2-2-3 | Clear huge ES segment register. |
| 3-2-3-1 | Search for option ROMs. |
| 3-2-3-3 | Shadow option ROMs. |
| 3-2-4-1 | Set up Power Management. |
| 3-2-4-3 | Enable hardware interrupts. |
| 3-3-1-1 | Set time of day. |
| 3-3-1-3 | Check key lock. |
| 3-3-3-1 | Erase F2 prompt. |
| 3-3-3-3 | Scan for F2 keystroke. |
| 3-3-4-1 | Enter CMOS setup. |
| 3-3-4-3 | Clear in POST flag. |
| 3-4-1-1 | Check for errors. |
| 3-4-1-3 | POST done, prepare to boot operating system. |
| 3-4-2-1 | One beep. |
| 3-4-2-3 | Check password (optional). |
| 3-4-3-1 | Clear global descriptor table. |
| 3-4-4-1 | Clear parity checkers. |
| 3-4-4-3 | Clear screen (optional). |
| 3-4-4-4 | Check virus and backup reminders. |
| 4-1-1-1 | Try to boot with INT 19. |
| 4-2-1-1 | Interrupt handler error. |
| 4-2-1-3 | Unknown interrupt error. |
| 4-2-2-1 | Pending interrupt error. |
| 4-2-2-3 | Initialize option ROM error. |
| 4-2-3-1 | Shutdown error. |
| 4-2-3-3 | Extended block move. |
| 4-2-4-1 | Shutdown 10 error. |
| 4-3-1-3 | Initialize chipset. |
| 4-3-1-4 | Initialize refresh counter. |
| 4-3-2-1 | Check for forced flash. |
| 4-3-2-2 | Check HW status of ROM. |
| 4-3-2-3 | BIOS ROM is OK. |
| 4-3-2-4 | Complete RAM test. |
| 4-3-3-1 | OEM initialization. |
| 4-3-3-2 | Initialize interrupt controller. |
| 4-3-3-3 | Read bootstrap code. |
| 4-3-3-4 | Initialize all vectors. |
| 4-3-4-1 | Boot the flash program. |
| 4-3-4-2 | Initialize the boot device. |
| 4-3-4-3 | Boot code was read OK. |
| Two-tone siren | Low CPU fan speed, voltage level issue. |
25-in-1 Precision Screwdriver Set | Compact Electronics Repair Tool Kit for Phones, Laptops & DIY Repairs | In-Store Only
Regular price $24.95 Sale price $9.95 Save $15.00Special in-store pricing for this product is available exclusively at our Maroubra Store (NSW).
Compact Precision Repair Kit for Everyday Electronics Repairs
This 25-in-1 precision screwdriver set is a practical and compact tool kit designed for basic electronics repairs, upgrades, and maintenance. Ideal for DIY users, students, hobbyists, and occasional repair work, it includes a range of commonly used precision bits suitable for laptops, mobile phones, watches, glasses, cameras, and other small electronic devices.
Its portable design makes it easy to keep in a drawer, toolbox, backpack, or workshop bench, ensuring you always have the right tool close at hand for everyday repair tasks.
Key Features
Suitable For
Important Note
This screwdriver set is designed for light-duty and occasional use. It is suitable for basic electronics repairs and maintenance tasks but is not intended as a professional workshop-grade tool kit for heavy daily commercial use.
Specifications
Package Includes
Images are for illustration purposes only. Product appearance, bit selection, packaging, and branding may vary slightly between batches.
Dark Player Smart Pen Multimeter 4000 Counts True RMS AC/DC Voltage Tester with NCV & LCD Display | In-Store Only
Regular price $29.95 Sale price $19.95 Save $10.00Special in-store pricing for this product is available exclusively at our Maroubra Store (NSW).
Compact smart pen-style multimeter with True RMS measurement, NCV non-contact voltage detection, resistance testing, continuity buzzer, LCD backlit display, flashlight, and automatic AC/DC identification. Ideal for electricians, technicians, DIY repairs, automotive diagnostics, and electronics testing.
The Dark Player Smart Pen Multimeter combines the convenience of a voltage tester pen with the functionality of a professional digital multimeter in a compact handheld design. Featuring automatic AC/DC voltage recognition, resistance measurement, NCV non-contact detection, continuity testing, and a bright LCD display, this portable tester is ideal for electrical troubleshooting, electronics repair, automotive work, and household diagnostics.
Its lightweight pen-style form factor makes it easy to carry and operate with one hand, while the integrated flashlight and backlit display improve visibility in dark environments.
Key Features:
2-in-1 Smart Pen Multimeter
Combines a multimeter and voltage test pen in one compact portable device.
True RMS Measurement
Provides accurate AC voltage readings for more reliable electrical diagnostics.
Automatic Measurement Detection
Automatically identifies AC voltage, DC voltage, resistance, and continuity without manual range selection.
NCV Non-Contact Voltage Detection
Detects live voltage safely without direct contact to help reduce electrical shock risks.
4000 Count Digital Display
Large LCD screen with backlight for clear and easy readings.
Live & Neutral Wire Detection
Quickly identify live and neutral wires for electrical testing and maintenance.
Continuity & Resistance Testing
Built-in buzzer and resistance measurement functions for troubleshooting circuits and components.
Integrated Flashlight
Front LED flashlight helps illuminate work areas in dark environments.
Portable Pen Design
Compact lightweight body ideal for electricians, technicians, field work, and DIY users.
Automatic Power Off
Helps preserve battery life during idle periods.
Specifications:
Package Includes:
Please Note:
This device is designed for testing and diagnostic purposes only. Use appropriate electrical safety precautions when working with live circuits. Images are for illustration purposes only.
Laptop & Phone Repair Tool Set | Phillips & Torx Screwdrivers with Plastic Pry Tool | In-Store Only
Regular price $29.95 Sale price $9.95 Save $20.00Special in-store pricing for this product is available exclusively at our Maroubra Store (NSW).
Β
This Laptop & Mobile Repair Tool Set includes essential screwdrivers and a plastic prying tool commonly supplied with laptop batteries, screens, and internal replacement parts.
The set contains one Phillips screwdriver and two Torx screwdrivers, designed for opening device housings, removing internal screws, and safely separating components. The included plastic scraper/pry tool is ideal for lifting clips, applying or removing screen protectors, and reducing the risk of scratches or damage to sensitive surfaces.
Made from non-conductive materials, these tools are suitable for laptops, notebooks, smartphones, tablets, and other small electronics. Ideal for technicians, repair shops, and DIY users.
1 Γ Phillips screwdriver (commonly used for laptop internal screws)
2 Γ Torx screwdrivers (sizes commonly used in laptops and mobile devices)
1 Γ Plastic scraper / prying tool
Non-conductive plastic pry tool for safe device opening
Phillips and Torx drivers suitable for electronics repair
Helps minimise scratches and damage during disassembly
Lightweight, compact, and easy to store
Ideal for laptop, phone, and tablet repairs
Laptop and notebook disassembly
Mobile phone and tablet repair
Screen and battery replacement
Screen protector application and removal
Β
M3 Brass Hex PCB Standoffs 7mm + 3mm Pack of 100 with Free Adapter Tool | In-Store Only
Regular price $19.95 Sale price $9.95 Save $10.00Special in-store pricing for this product is available exclusively at our Maroubra Store (NSW).
These M3 brass hex PCB standoffs are designed to securely mount motherboards, PCBs, and electronic components, providing reliable spacing and insulation between boards and chassis.
Manufactured from solid brass with a gold-tone finish, they offer excellent durability, corrosion resistance, and electrical stabilityβideal for computer builds, electronics projects, and repairs.
Thread Size: M3 (male to female)
Standoff Length: 7 mm
Male Thread Length: 3 mm
Overall Length: approx. 10 mm
Material: Brass
Finish: Gold tone
Shape: Hex (easy installation with tools)
Thread Type: Metric
100 Γ M3 Brass Hex PCB Standoff Screws (7mm + 3mm)
Includes a free adapter that attaches to a standard Phillips screwdriver, allowing quick and easy installation of the hex standoffs without specialised tools.
Motherboard mounting
PCB spacing and support
Computer cases
Electronics assemblies
DIY and repair projects